Yamaha RX-V670 - Manual (Page 10)

10
1
Set to “
∞
”.
2
Select the front speakers to be used.
* If you use two front speaker systems, press both the A
and B switches.
3
Set to “0”.
4
Set to “0”.
5
Set to “YPC”.
6
Speaker balance adjustment
This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test
tone generator. With this adjustment, the sound output level heard at the listening position will be the same from each speaker.
This is important for the best performance of the digital sound field processor.
The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.
Otherwise, the result may not be satisfactory.
ADJUSTMENT BEFORE OPERATION
VOLUME
0
SPEAKERS
BASS
— 5 + 5
0
TREBLE
— 5 + 5
0
BALANCE
0
L 5 5 R
POWER
6 1
2 3 4
6
5
–dB