Yamaha RX-V670 - Manual (Page 17)

17
PRESET TUNING
This unit can store station frequencies (selected by tuning operation) by using preset station buttons. With this function, you can
select any desired station simply by pressing the corresponding preset station button. Up to 40 stations (8 stations per page) can
be programmed.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the POWER switch is turned off or the
power plug is disconnected from the AC outlet or the power is
cut due to temporary power failure. If, however, the power is cut for more than two weeks, the memory may be erased. If
so, it can be re-programmed simply by following the PRESET
TUNING steps.
Tune to the desired station.
(Refer to the previous page for tuning procedures.)
Select the desired page (A – E) of preset station
buttons while watching the display.
Press a preset station button before “MEMORY” goes
off from the display.
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations to the preset station
buttons on other pages in the same way by selecting
other pages in step 2.
Select the page of preset station buttons.
Select the desired preset station button.
To program stations To recall a preset station
1
2
3
4
1 1
2 2
Notes
● A new setting can be programmed in place of the former
one.
● For presets, the setting of the reception mode (stereo or
monaural) is stored along with the station frequency.
A/B/C/D/E
PRESET
MHz FM
MEMORY PRESET
MHz FM
MEMORY
PRESET
TUNING STEREO
0 MHz 40 60 80 100 FM
AUTO
A/B/C/D/E
PRESET
MHz FM
4, 2 2 2, 1 1
3
(Preset station buttons)
Shows the displayed station
has been programmed to A1.