Yamaha RX-V461 - Manual (Page 12)

Quick start guide
8
En
1
Turn on the video monitor connected to this
unit.
2
Press 1
STANDBY/ON on the front panel.
3
Press F
SCENE 1.
“DVD Viewing” appears in the front panel display,
and this unit automatically optimize own status for
the DVD playback.
y
The indicator on the selected SCENE button lights up while
this unit is in the SCENE mode.
4
Start playback of the desired DVD on your
player.
5
Rotate 8VOLUME to adjust the volume.
When you change the input source or sound field program, the
SCENE mode is deactivated, and the indicator on the selected
SCENE button turns off.
■ Using the other SCENE buttons
In the following cases, try pressing the corresponding
SCENE button to enjoy playback of the desired sources.
Case A: “I want to listen to a music disc from the
connected DVD player as the background
music for this room...”
Press F
SCENE 2 (or
F SCENE 2) to select “Disc
Listening”.
Case B: “I want to watch a TV program...”
Press F
SCENE 3 (or
F
SCENE 3) to select “TV
Viewing”.
To use the “TV Viewing” template (Case B), you must
connect a cable TV or a satellite tuner to this unit in
advance. See page 15 for details.
Step 3: Turn on the power and
press SCENE 1 button
Check the type of the connected speakers.
If the speakers are 6 ohm speakers, set “SP IMP.” to
“6
Ω MIN” before using this unit (see page 13).
Note
Note