Yamaha RX-V461 - Manual (Page 67)

63
En
Remote control features
English
AD
V
ANCED
OPERA
T
ION
Use this feature to clear all the remote control codes
previously set and reset all of them to the initial factory
settings.
1
Press UCODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
2
Press the numeric buttons to enter the code
number “9981”.
The TRANSMIT indicator on the remote control
flashes twice, and all the remote control codes
previously set are cleared and reset to the initial
factory settings.
y
If you do not press any buttons within 30 seconds after step 2, the
clearing process is canceled. In this case, repeat the clearing
procedure.
Resetting all remote control codes
TRANSMIT
STANDBY POWER POWER POWER
AV TV
TRANSMIT CODE SET
Flashes
TRANSMIT
5 6 7 8
9 0
1 2 3 4
MUSIC ENTERTAIN MODE STEREO
ENHANCER STRAIGHT DIRECT ST.
SUR. DECODE NIGHT
Flashes