Yamaha RX-V461 - Manual (Page 33)

29
En
Selecting the SCENE templates
English
BA
S
IC
OPERA
T
ION
You can create your original SCENE templates for each
SCENE button. You can refer to the preset 16 SCENE
templates to create the original SCENE templates.
■ Customizing the preset SCENE
templates
Use this feature to customize the preset SCENE templates.
1
Turn on the video monitor connected to this
unit.
2
Set the operation mode selector (K) to
AMP
and then press and hold the desired
F
SCENE button for 3 seconds.
The SCENE template customizing screen appears on
the video monitor.
When the SCENE template you want to customize is not
assigned to any of the FSCENE button, press Dl / h
repeatedly to recall the desired SCENE template on the
menu screen.
3
Press Dk / n to select the desired parameter
of the SCENE template and then Dl / h to
select the desired value of the selected
parameter.
You can adjust the following parameters for a SCENE
template:
• INPUT: The input source component
• MODE: The active sound field programs,
STRAIGHT or DIRECT STEREO
mode (see pages 33 and 36)
• NIGHT: The night listening mode setting (see
page 33)
− SYSTEM: Keeps the current night listening
mode.
− CINEMA: Sets the night listening mode to the
CINEMA mode.
− MUSIC: Sets
the night listening mode to the
MUSIC mode.
4
Press the F
SCENE button again to confirm
the edit.
y
An asterisk mark (*) appears by the name of the original SCENE
template.
• Once the desired SCENE templates are assigned to the
corresponding FSCENE buttons, you may need to set the
input source of the SCENE template on the remote control. See
page 59 for details.
• You can create a customized SCENE template for each
FSCENE button, and if you create another customized
SCENE template, this unit overwrites the old customized
SCENE template with the new one.
• The newly created template is only available for the assigned
FSCENE button.
■ Renaming the SCENE templates
Select “SCENE” in step 3 of “Customizing the
preset SCENE templates” and then press
D
ENTER.
• Press Dk / n to select the desired character.
• Press
D l / h to place “_” (underscore) under the
space or the desired character.
• Press ERETURN to cancel the new name.
• Press DENTER to confirm the new name.
Creating your original SCENE
templates
Note
1
SCENE template library
(Image)
Select a SCENE template
Assign to the SCENE
button
Create the original SCENE
template
TV
SOURCE
AMP
1
3 seconds
Notes
1