Zanussi ZCE 651 - Manual (Page 12)

12
How to make the oven switch
off automatically
This function allows the oven to automatically switch off
at the end of a programmed cooking duration time.
Place food in the oven, select a cooking function and
adjust the cooking temperature (see paragraph “How to
select a cooking function and set the temperature”).
Press button “Time” to select the “Cook Time” function.
The relevant indicator will start flashing and the display
will show "0.00". Then, proceed as follows:
To set the duration time:
1. Turn the time/temperature control knob to
and
select the required time while the relevant indicator
flashes (maximum time: 9 hours 59 minutes).
2. After the setting is carried out, wait for 5 seconds.
The display will show the set temperature.
Press button “Time” to display the cooking time.
3. When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard
and the relevant indicator will start flashing. The
display shows “0.00”.
4. To switch off the acoustic alarm, turn the oven function
control knob to the “OFF” position (0).
If you press a button other than the knob, the alarm
will switch off and the display will show “--- °C”. This
means that the oven cannot be operated.
Turn the oven control knob to the “OFF” position (0)
to reset the oven.
The display will revert to the time of day.
To change the duration time:
1. Press button “Time” to select the “Cook Time”
function. The relevant indicator will flash.
2. Turn the time/temperature control knob to or
to change the cooking duration.
To cancel the duration time:
1. Press button “Time” to select the “Cook Time”
function. The relevant indicator will flash and the
display will show the remaining cooking time.
2. Turn the time/temperature control knob to until
the display shows “0.00”. After 5 seconds the indicator
will go out and the display will revert to the time of
day.
It is not possible to set the “Cook Time” function
when the oven is off.