Basic receiver operations, Pure direct mode – Yamaha MCR-E810 User Manual

Page 26

Advertising
background image

Basic Receiver Operations

22

En

Follow the procedure below to select an input source and adjust the sound settings on the receiver.

1

Press STANDBY/ON to turn on the receiver.

If the DVD player is connected to the receiver with
the system control cable, the DVD player turns on
automatically. The front panel display of each
component lights up.

y

This system has the auto-standby function (see page 45) which
automatically set to the system to the standby mode if you do not
operate the system for 30 minutes while the receiver is set to the
DVD/CD input mode.

2

Press one of the input selection keys to
select the desired input source.

3

Start playback on the selected source
component or select a broadcast station.

For information on the disc playback, see page 25, and
for information on tuning, see page 37.

4

Press VOLUME +/– to adjust the volume to
the desired output level.

5

Rotate BASS, TREBLE, or BALANCE on the
front panel of the receiver to adjust the
following settings.

BASS:

Adjusts the low frequency response.

TREBLE:

Adjusts the high frequency response.

BALANCE:

Adjusts the volume level of each left

and right speaker channel.

Pure Direct mode

The Pure Direct mode shuts down the tone control
circuitry, allowing you to enjoy pure high-fidelity sounds
from analog sources.

Press PURE DIRECT on the front panel of the
receiver to turn on the Pure Direct mode.

PURE DIRECT lights up, and the front panel display
automatically dims.

• While the Pure Direct mode is turned on, neither BASS,

TREBLE, nor BALANCE are available.

• If you carry out any operation while the Pure Direct mode is

turned on, the front panel display lights up briefly to
acknowledge the command and dims again.

To turn off the Pure Direct mode

Press PURE DIRECT again so that PURE DIRECT turns
off and the front panel display lights up.

To use headphones

Connect the headphones to the PHONES jack. You can
listen to the sound to be output from the speakers through
the headphones.

Basic Receiver Operations

ENTER

A E

DISPLAY

SLEEP

DVD/CD

TUNER

BAND

TAPE/MD

SUBTITLE ANGLE

ZOOM

AUDIO

AUX/TV

DOCK

A E

SET UP

TV VOL

VOLUME

TOP MENU

/RETURN

STANDBY/ON

POWER

TV

1

2

3

4

5

6

9

0

7

8

SCAN

DIMMER

MIN

MAX

VOLUME

INPUT

BALANCE

L

R

TREBLE

BASS

PHONES

STANDBY/ON

TIMER

DISPLAY

MEMORY

NATURAL SOUND STEREO RECEIVER RX-E810

PRESET/BAND

PRESET/TUNING

PURE DIRECT

HOUR

TIMER

TIME ADJ

MIN

AUTO/MAN'L

PHONES

TREBLE

BASS

STANDBY/ON

(

)

VOLUME +/–

PURE DIRECT

Input
selection
keys

BALANCE

Notes

Advertising