Zenoah EDG2300 - Manual (Page 13)

Operation
■ STOPPING ENGINE
• Release the throttle lever and press on
the red button until the engine comes to a
complete stop.
■ BORING OPERATION
• Keep the engine running at full throttle
during operation.
• Keep the drill going straight. Tilted boring
can cause the drill to bend.
• Avoid touching the spark plug lead during
operation.
■ ADJUSTMENT OF IDLING SPEED
• The engine idling speed is preadjusted at
the factory so that the engine keeps
running without moving the drill when
releasing the throttle lever to the idling
position. However, due to changes in
engine conditions, it may be necessary to
adjust the idling.
• To increase idling, screw idle adjustment
screw in, until preferred speed is obtained.
To decrease idling, unscrew idle
adjustment screw until preferred speed is
obtained.
Stop button
Idle adjustment
screw
13 