Parts location & specifications setup – Zenoah EDG2300 User Manual
Page 9
Parts Location & Specifications
Setup
1. Attach the grip and the drill chuck to the
power unit securely by hand.
2. Insert the drill into the chuck, and tighten
firmly.
MODEL EDG2300
Overall Dimensions (LxWxH)
in (mm)
14.7x8.42x9.34 (366x210x233)
Dry Weight
lbs (kg)
10.6 (4.8kg)
Transmission
Automatic centrifugal clutch and reduction gears
Reduction Ratio
1 : 10.6
Recommended drill size
in (mm)
Dia. 1/2in.(12.7mm)
Engine Type
Air cooled 2-cycle gasoline engine
Displacement
cc (cu. in)
22.5 (1.37)
Max. Output
kW (HP)
0.87 (1.18) at 8000 rpm
Fuel
Mixture (Gasoline 50 : 2-cycle oil 1)
(when using RedMax/ZENOAH genuine oil)
Fuel Tank Capacity
pints ( )
1.21 (0.57)
Carburetor
Diaphragm type, Rotary Valve
Ignition System
Transistor controlled flywheel magneto
Spark Plug
NGK BPMR7A
Starting
Recoil starter
Stopping
Primary circuit short-circuiting
Standard Accessory
Service tool kit
Specifications are subject to change without notice.
Stop switch
Throttle lever
Rear grip
Starter grip
Air cleaner
Fuel cap
Front grip
Reduction unit
Chuck
Drill
Spark plug
Muffer
9