Zenoah EDG2300 - Manual (Page 8)

8 
Safety Precautions
■ NOTES ON CARE AND MAINTENANCE
OF YOUR PORTABLE GAS DRILL
• In order to maintain your portable gas drill
in proper working order, perform the
maintenance and checking operations
described in this manual at regular
intervals. In the event that any parts must
be replaced or any maintenance or repair
work not described in this manual must be
performed, please contact a
representative from the store nearest
RedMax authorized servicing dealer for
assistance.
• Under no circumstances should you ever
take apart the portable gas drill or alter it
in any way. Doing so might result in the
portable gas drill becoming damaged
during operation or the portable gas drill
becoming unable to operate properly.
• Always be sure to turn off the engine
before performing any maintenance or
checking procedures.
• When removing, or reattaching the drills,
be sure to wear thick, sturdy gloves and
use only proper tools and equipment to
prevent injury.
• When replacing drills or any other parts or
when replacing the oil or any lubricants,
always be sure to use only RedMax
products or products which have been
certified by RedMax for use with the
portable gas drill.
• Do not use any accessory or attachment
other than those bearing the RedMax
mark and recommended for the unit.
Emission Control Label
IMPORTANT ENGINE INFORMATION
THIS ENGINE CONFORMS TO U.S. EPA
PH1 FOR SMALL OFF-ROAD ENGINES.
ENGINE FAMILY : 7KZXS.0254CD ; EM
*1
ENGINE DISPLACEMENT : 23cc
REFER TO OWNER'S MANUAL FOR MAINTE-
NANCE, SPECIFICATIONS AND ADJUSTMENTS.
MANUFACTURED:
ZENOAH CO.,LTD.
USE JASO FC OR ISO EGC GRADE 50:1 OIL.
Information du moteur importante
Ce moteur est conforme aux reglements U.S. EPA
PH1 pour les petits moteurs du offroad.
Type de moteur : 7KZXS.0254CD ; EM
*1
Cylindree du moteur : 23cc
Se fererer au manuel de l'utilisateur pour les specifications
d'entretien et les reglages.
FABRIQUE PAR:
ZENOAH CO.,LTD.
Utilise JASO FC ou ISO EGC 50:1 Huile.
*1: The initial number will be changed every year
of manufacturing.
*1: Le nombre initial changera chaque année de la
fabrication.