Zoom X4 - Manual (Page 39)

Appendix A: Front and Back Panel Information 39
Appendix A
Front and Back Panel
Information
Back Panel
The back panel of your unit looks like this.
The table below defines the purpose of these ports, or jacks.
Port Description
PWR Port to connect the unit to the power adapter.
ON/OFF Toggle switch to turn the unit on or off.
USB Port to connect the unit to the USB port of a computer.
RESET Button to reset the unit to its system default settings
(necessary if communication link is lost).
ETHERNET Port to connect the unit to an access point, a network hub,
or the Ethernet (10BaseT) port of a computer.
PHONE Port to connect a phone to the unit.
ADSL Port to connect the unit to the ADSL telephone wall jack.
Front Panel
The front panel of your unit looks like this.
PWR ON OFF RESET ETHERNET PHONE ADSL USB