Zoom X4 - Manual (Page 9)

Chapter 1: Installation Instructions 9
To Connect via the USB Option
1 1 1 1 You must install the requisite USB software on your
Windows computer before connecting the hardware.
a a a a Insert the supplied CD-ROM into your computer. The
CD starts automatically and the Main Menu opens:
(Note: If the CD does not start automatically, from the
desktop, go to Start | Run and then type D:\setup.exe,
where D is the letter of your CD-ROM drive.)
b b b b
Click the ADSL Modem Installation Wizard button
and, if prompted, the USB option. The software
installation proceeds automatically. When the process is
complete, the Main Menu minimizes for future use and a
Zoom Web Console icon resides on your desktop.
2 2 2 2 Now connect the hardware. All connections originate from
the X4’s back panel.
(For reference, we have included a table that defines these
back panel ports, or jacks; see page 39.)
a a a a Plug one end of the included power adapter into the
unit’s PWR jack and the other end into a power strip or
wall receptacle.
PWR ON OFF RESET ETHERNET PHONE ADSL USB