Zoom X4 - Manual (Page 52)

52 X4 ADSL Modem User’s Manual
BROADCAST=172.16.31.255
IPADDR=172.16.16.55
NETMASK=255.25.240.0
NETWORK=172.16.16.0
Note: If your computer won’t always be on a network with
working DNS at boot-time, set ONBOOT=no. If you
don’t, RedHat 6.2 (and possibly other versions) might
hang. To activate the card by hand when you have
attached your computer to the network, at root, run the
command: /sbin/ifup eth0.
For SuSE For SuSE For SuSE For SuSE
Edit the file /etc/rc.config; search for the variables
NETCONFIG, NETDEV_0, and IFCONFIG_0.
Set them as follows (see the instructions in rc.config):
NETCONFIG="_0"
NETDEV_0="eth0"
IFCONFIG_0="dhcpclient"
Reboot with this command: /sbin/shutdown -r now.
If you want to use a static IP address—for example, when setting
up a virtual server (page 23) or a DMZ (page 26)—consult the help
file or documentation that came with your operating system.
For Debian For Debian For Debian For Debian
Add this line to the file /etc/network/interfaces: iface eth0 inet
dhcp. Reboot with this command: /sbin/shutdown -r now.
If you want to use a static IP address—for example, when setting
up a virtual server (page 23) or a DMZ (page 26)—consult the help
file or documentation that came with your operating system.