Zenith R50W47 - Manual (Page 13)

Owner’s Manual 13
Operation
On-screen Menus Language Selection On-screen Menus Language Selection
TV Operation Overview TV Operation Overview
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the menu button and then use D / E button to select the OPTION menu.
2. Press the G button and then use D / E button to select Language .
3. Press the G button and then use D / E button to select your desired language,
and the on-screen menus will then appear in that language.
4. Press exit button to return to TV viewing or press menu button to return to the pre-
vious menu.
SETUP
VIDEO
AUDIO
TIME
OPTION
LOCK Prev.
Aspect Ratio
Caption
Caption Mode
Caption Option
Language G
VM
Auto Convergence
EZ Demo
English
Español
Français
MENU
1. First, make all equipment connections. Connect power cord correctly. At this time, the TV is switched to stand-
by mode.
• In standby mode, press the power, tv/video, comp/dvi, front, ch (+, -), Number (0 ~ 9) button on the
remote control or on/off, tv/video, ch ( D / E ) located on the TV to turn the TV on.
2. Select the viewing source by pressing tv/video, front or comp/dvi repeatedly.
• Note: See page 14 if you have not auto programmed the TV to receive channels in your local broadcast area.
3. After viewing, press the power button on the remote control or on/off located on the TV. The TV reverts to stand-
by mode.
NOTE
• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
Operation Operation
* In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just example to help
the TV operation.