2nd Ave. DVPDNET-SL DeviceNet Network Scanner DVP-0204520-02 - Manual (Page 16)

DeviceNet Network Scanner DVPDNET-SL
DVP-PLC Operation Manual 14
(11) Double click on RTU-DNET icon, and you will then see “RTU Setup” dialog box.
(12) Set up the parameters in RTU-DNET and confirm its I/O information.
Item Function Default
Input IO
Data Length
The sum of the length of the status word of RTU-DNET and
the input data of the I/O module connected to it. The status
word of RTU-DNET occupies 2 bytes. One input channel of
the special I/O module occupies 2 bytes. 8 points of the
digital input are counted as 1 byte.
N/A
Output IO
Data Length
The sum of the length of the control word of RTU-DNET and
the output data of the I/O module connected to it. The control
word of RTU-DNET occupies 2 bytes. One output channel of
the special I/O module occupies 2 bytes. 8 points of the digital
output are counted as 1 byte.
N/A
DIDO Input
Points (X)
The digital input points shall be 8’s multiple. The number will
be regarded as 8 when it is less than 8 and regarded as 16
when it is bigger than 8 but less than 16.
N/A