Covad 6812D-MGCP - Manual (Page 15)

15 Covad Confidential
7. Configure the IP address for the phone by using the following command sequence.
ƒ Click the “Settings” button on the phone
ƒ Press the (1) button, or move cursor to “1. Network Configuration” using [Next]/[Prev] soft keys, and press
the [OK ] soft key.
ƒ Press the (2) button, or move cursor to “2. IP Address”” using [Next]/[Prev] soft keys, and press the [OK ]
soft key.
ƒ Input the IP address using the keypad
ƒ - Press the asterisk (‘*’) button to input dot (‘.’).
ƒ - Press [Clr ] soft key to delete all characters.
ƒ - Press [ß] soft key to delete the character in front of cursor.
ƒ - The IP address can be changed only under the ‘Static’ mode, and not in the ‘DHCP’ mode.
ƒ Press the [OK] softkey
8. Configure the Subnet Mask for the phone by using the following command sequence.
ƒ Click the “Settings” button on the phone
ƒ Press the (1) button, or move cursor to “1. Network Configuration” using [Next]/[Prev] soft keys, and press
the [OK ] soft key.
ƒ Press the (3) button, or move cursor to “3. Subnet Mask” using [Next]/[Prev] soft keys, and press the [OK ]
soft key.
ƒ Input the Subnet Mask using the keypad
ƒ - Press the asterisk (‘*’) button to input dot (‘.’).
ƒ - Press [Clr ] soft key to delete all characters.
ƒ - Press [ß] soft key to delete the character in front of cursor.
ƒ - The IP address can be changed only under the ‘Static’ mode, and not in the ‘DHCP’ mode.
ƒ Press the [OK] softkey
LG IP Phone Configuration – Manual Method