Covad 6812D-MGCP - Manual (Page 18)

18 Covad Confidential
12. Configure the NTP Server Address for the phone by using the following command sequence.
ƒ Click the “Settings” button on the phone
ƒ Press the (4) button, or move cursor to “4. Time Configuration” using [Next]/[Prev] soft keys, and
press the [OK ] soft key.
ƒ Press the (1) button, or move cursor to “1. NTP Server Address” using [Next]/[Prev] soft keys, and
press the [OK ] soft key.
ƒ Input the NTP Server address using the keypad
ƒ - 64.2.21.49
ƒ - Press the asterisk (‘*’) button to input dot (‘.’).
ƒ - Press [Clr ] soft key to delete all characters.
ƒ - Press
[ ß] soft key to delete the character in front of cursor.
ƒ - The [Mode] soft key, switches the keypad entry mode: number ([1]), upper case ([A]),
lower case ([a]) or special character ([S]) mode.
ƒ Press the [OK] softkey
13. After entry of certain configuration settings, the LIP-6812 will require a reboot to move the
settings to active memory. These settings include the following:
ƒ Network Configuration settings
ƒ Call Server Address settings
ƒ DSS Registration settings
ƒ Software Update settings
ƒ Default settings
LG IP Phone Configuration – Manual Method