Covad 6812D-MGCP - Manual (Page 2)

2 Covad Confidential
LG IP Phone Turn-up Summary for New Installs*
Phone Location Configuration
Document
Overview of
Local Configuration Steps
Description of what happens to
phone
1. Managed For
new/adds to
sites using DHCP
with broadband
connection to
Covad
LG IP Phone
Configuration
using DHCP
- see slides 3-8
2. Manual
Method. For
adds to existing
Managed sites
where DHCP not
implemented
LG IP Phone
Configuration –
Manual Method
- see slides 9-14
9 Configure phone IP settings via manual
configuration
9 Plug phone into network
9 At 0000, invoke *51 procedure to bind
number to phone
¾ Gets IP address as manually
configured
¾ Gets basic VoIP settings,
latest/current firmware from new
TFTP server at:
¾ 64.2.21.251 (Sunnyvale)
¾ 64.2.21.45 (San Jose)
¾ 68.165.105.181 (Sunnyvale2)
¾ 72.245.184.75 (DC)
¾ Extension bound to MAC address
Unmanaged
Sites
Not a supported application with LG phones
9 If phone is used, erase configuration
9 Plug phone in to network. 5 minute auto
load!
9 At “0000” invoke *51 procedure to bind
number to phone
¾ Gets IP address via DHCP from CPE
router
¾ Gets VoIP settings, latest/current
firmware from new TFTP server at:
¾ 64.2.21.251 (Sunnyvale)
¾ 64.2.21.45 (San Jose)
¾ 68.165.105.181 (Sunnyvale2)
¾ 72.245.184.75 (DC)
¾ Extension bound to MAC address
Covad offers several stream-lined ways to provision LG IP phones on our network, depending upon the type of circuit.
*--Working phones must not have their TFTP server address changed (i.e., from 64.2.21.251 to 64.2.21.x) as this may impact
phone operation.