3M MP8660 - Manual (Page 10)

ENGLISH
8
E 3M 1997
3M Multimedia Projector MP8660
Note
Operating the mouse functions through the MP8660
remote control may disable the internal pointing device
(IPD) on your computer. It is recommended that you
review the operating instructions for your computer before
connecting an external device of any kind.
Serial Mouse Cable (PC Computer):
Install the serial mouse cable (Figure 3-10) to connect
the serial mouse port on your computer to the mouse
I/F terminal on the MP8660 projector. A serial
mouse driver must be loaded on your PC computer
for this function to operate properly. It is best to
reference the operating instructions for your computer
before connecting an external mouse device of any
kind.
Com
Mouse
Port
Mouse I/F
Terminal
Serial Mouse Cable
Figure 3-10. PC Serial Mouse Cable
To load a serial mouse driver on a computer using Microsoft
t Windows or Windows for Workgroups, go
into the Windows Setup function. From Program Manager click Main; then click Windows Setup; (note
the current mouse driver that is loaded); click Options; click Change System Settings. Choose Mouse. You
will need to have the Serial Mouse on Comm 1 driver loaded. It will most likely be listed as Serial or Bus
Mouse. Click OK to apply the serial mouse driver. Restart Windows if prompted.
Hint: To load a serial mouse driver on a computer using Microsoft
tWindowst95, go into the Control Panel.
Click Start; select Settings; select Control Panel. Click on Mouse; select the General tab; (note the current
mouse driver that is loaded); select Change; select Show all compatible devices; (note the current
Manufacturer and Model); select Standard Mouse Type for Manufacturer; select Standard Serial Mouse.
Click OK to apply the serial mouse driver. Restart windows when prompted.
PS/2 Mouse Adapter Cable (PC Computer):
Install a PS/2 mouse adapter cable (Figure 3-11) to
the serial mouse cable to complete the mouse
emulation connection for a PS/2 computer.
PS/2
Mouse
Port
Mouse I/F
Terminal
Serial Mouse Cable
PS/2
Mouse
Adapter
Cable
Figure 3-11. PS/2 Mouse Adapter Cable
ADB Mouse Adaptor Cable (MAC Computer):
Install an ADB mouse adapter cable (Figure 3-12) to
the serial mouse cable to complete the mouse
emulation connection for a MAC computer.
ADB
Mouse
Port
Mouse I/F
Terminal
Serial Mouse Cable
ADB
Mouse
Adapter
Cable
Figure 3-12. ADB Mouse Adapter Cable
Control Cable (3rd Party Control Box):
Install the RS-232 control cable (Figure 3-13) from
the RS-232 port on the computer to the RS-232
terminal on the projector. This connect will provide
the communication between the MP8660 and a 3rd
Party Control Box. See the Technical Appendix for
the valid Serial Interface Command Codes which will
control projector functions.
Com
Mouse
Port RS-232 I/F
Terminal
RS-232 Control Cable
Figure 3-13. RS-232 Control Cable