3M MP8660 - Manual (Page 16)

ENGLISH
14 3M 1997 3M Multimedia Projector MP8660
SETUP SUB–MENUS (RGB, VIDEO), continued
VIDEO – SETUP SUB–MENU
Adjustment Screen Value/Position Default
BRIGHTNESS
±
00 |––––––|––––––|
±
0
CONTRAST
±
00 |––––––|––––––|
±
0
COLOR
±
00 |––––––|––––––|
±
0
TINT
±
00 |––––––|––––––|
±
0
IMAGE SUB–MENU
Press the MENU button to display the Main Menu. The SETUP Sub–Menu will be highlighted. Press the
up/down arrow or move the mini–joy stick up/down to select the IMAGE Sub–Menu. Press the right arrow on
the control panel or move the mini–joy stick right to enter the sub–menu.
MESSAGE
MIRROR
NORMAL
H INVERT
V INVERT
H&V INVERT
SETUP MIRROR
IMAGE MESSAGE
OPTION
Figure 4-6. Image Menu
Press the up/down arrows or move the mini–joy stick up/down to select the desired adjustment screen
(MIRROR or MESSAGE). Press the SELECT button to enter the adjustment screen.
Note
In Figure 4-6, the IMAGE Sub–Menu then the
MIRROR Adjustment Screen have been selected.
Press SELECT to enter the MIRROR Adjustment
Screen.
Use the up/down/left/right arrows or mini–joy stick to change the value. The new value will activate as soon
as it is changed. Press the SELECT button to return to the IMAGE Sub–Menu.
Refer to the IMAGE Sub–Menu chart below. A description and the default for each value is listed.
If you press the RESET button, the selected value will return to the factory default setting.
IMAGE SUB–MENU
Adjustment Screen Value Description Default
MIRROR NORMAL Standard tabletop projection (no inversion) ON
(see note above) H INVERT Rear projection application OFF
V INVERT Ceiling mount and rear projection application OFF
H & V INVERT Ceiling mount application OFF
MESSAGE ON
OFF ON = messages display
OFF = no messages display ON