Olympus AU2700 - Manual (Page 47)

- 47 -
Text information Contents menu
rack no. /cup position
rack no. digit use/none
4/5 [PARAMETER] [ONLINE]
[PROTOCOL] menu.
Sex
age/month use/none
use/none [PARAMETER] [FORMAT]
[REQUISITION FORMAT]
menu.
patient information 1
patient information 2
patient information 3
patient information 4
patient information 5
patient information 6 use/none digits
use/none digits
use/none digits
use/none digits
use/none digits
use/none digits [PARAMETER] [FORMAT]
[REQUISITION FORMAT]
menu.
sample ID digits 4-26 digits [PARAMETER] [FORMAT]
[REQUISITION FORMAT]
menu.
data format 6 /9 digits [PARAMETER] [ONLINE]
[PROTOCOL] menu.
data zero suppress used/none [PARAMETER] [ONLINE]
[PROTOCOL] menu.
Sample Type used/none [PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
Dummy
(Test Result Transmission Text) used/none [PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
Block Identification No. used/none [PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
ANL Unit No. used/none Note 3 [PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
Cuvette Side used/none Note 3 [PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
Sequence of S.No. and S.ID in
T.R.I text S.No. / S.ID [PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
Sequence of S.No. and S.ID in
Test result text S.No. / S.ID [PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
Lot No. and Bottle No. used/none [PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
Note 1)When you send the “Block Identification No.” field as none, the program will change the parameters automatically as
following. End Code = ETX
ETB Control = used
Note 3) Only a Normal sample and repeat sample can be changed.