3Com WXR100 3CRWXR10095A - Manual (Page 331)

display mobility-domain status 331
display
mobility-domain
status On the seed WX, displays the Mobility Domain status and members.
Syntax —
display mobility-domain status
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To display Mobility Domain status, type the following
command:
WX4400# display mobility-domain status
Mobility Domain name: Pleasanton
Member State Status
--------------- ------------- --------------
192.168.253.11 STATE_UP MEMBER
192.168.253.12 STATE_DOWN MEMBER
192.168.253.14 STATE_UP SEED
Table 48 describes the fields in the display.
See Also
„
clear mobility-domain on page 328
„
set mobility-domain member on page 332
„
set mobility-domain mode member seed-ip on page 334
Table 48 display mobility-domain Output
Field Description
Mobility Domain
name Name of the Mobility Domain
Member IP addresses of the seed WX switch and members in the
Mobility Domain
State State of the WX switch in the Mobility Domain:
„
STATE_UP
„ STATE_DOWN
Status Role of the WX switch in the Mobility Domain:
„
MEMBER
„ SEED