Harbor 1650 PSI - Manual (Page 9)

Page 9 For technical questions, please call 1-800-444-3353. SKU 69488
Sa
FE
ty
Op
ER
ati
O
n
m
aint
Enanc
E
SE
tup
Features
note: Familiarize yourself with the location and function of all of the machine’s
controls before proceeding to setup of the machine.
1. this item is equipped with a
GFci (Ground Fault circuit interruption) plug.
Read and follow these GFci precautions:
WaRninG! tO pREVEnt ElEctRic ShOck
anD DEath:
test GFci (Ground Fault circuit interrupter)
before each use as follows:
a.
FiGuRE a
inDicatOR
RESEt
ButtOn
tESt
ButtOn
make sure the trigger is released and
plug GFci into power outlet. press reset
button. indicator should turn on.
b. press test button. indicator should turn off.
c. press reset button again for use.
Do not use if above test fails.
the GFci device does not protect
against electrical shock due to contact
with both circuit conductors or a fault
in any wiring supplying this device.
Should replacement of the GFci power
plug become necessary, only a qualified
technician should perform the service.
Do not alter or disable the GFci power plug.
to allow the GFci unit to function
properly, extension cords must not be
used with this pressure washer.
2. The Spray Control Sleeve on the Spray Wand
can be rotated for a range of spray patterns,
from a full fan spray to a direct stream spray.