Muratec F-116 - Manual (Page 49)

Disassembly and Reassembly
3-5
3.6 Scan Ass’y
1. Before removing Scan Ass’y, remove the rear
cover.
2. Open the front cover.
And remove 2 screws from the front.
3. Remove the harness cover [A] from the rear
after removing 1 screw.
4. Remove all connectors and 1 screw.
5. Remove 1 screw.
Then lift the Scan Assy up.
[A] [A]
[A] [A]
[A] [A]
[A] [A]