3Com 3500 - Manual (Page 273)

bridge multicast igmp queryIpAddress 273
bridge multicast igmp
3500
✓
9000
✓
9400
✓ 3900
✓ 9300
queryIpAddress
For CoreBuilder 9000: Applies to Layer 2 switching modules only.
Configures the source address that is inserted in IGMP query packets.
Valid Minimum Abbreviation
b mu i queryi
Important Considerations
■
For the CoreBuilder 9400 and SuperStack II Switch 9300 and 3900
systems, you do not need to used this command as long as you have
one in-band IP interface configured; the system uses its IP address as
the source IP address of query packets. Use this command only if you
want the system to use a different source IP address for query packets.
If there are no in-band IP interfaces configured and you want to
enable querying, you must enter an IP address with this command.
■
For a CoreBuilder 9000 Layer 2 switching module to offer itself as a
querier, you must enter an IP address with this command.
■
For the CoreBuilder 3500 system and CoreBuilder 9000 Layer 3
modules, IGMP commands exist under the
ip multicast igmp
menu.
Options
Prompt Description Possible Values [Default]
IGMP Query
Source IP
Address Source address that the
system uses in its IGMP
queries Any unique IP
address in dotted
decimal format 0.0.0.0, first in-band
IP interface index, or
current value
(3900, 9300, 9400)
0.0.0.0, or current
value (9000 L2)