Plantronics Discovery 610 - Manual (Page 69)

 
Using VoicE actiVatED Dialling
NOTE: To use voice activated dialling, the voice activated dialling feature must be enabled on your device.
See your Bluetooth device manual for instructions. With the headset on, one long press on the call control
button activates the voice activated dialling feature on the headset.
mUltiPlE UsEs of a long PrEss on tHE
call control BUtton
heAdset FUnction
stAte oF the
Bluetooth device
resUlt
Turn on power Power off Turns the power on
Re-link to
Bluetooth device
Power on
Link dropped
Re-links the device
Reject call
Power on
Linked
Incoming call
Disconnects the call or sends the call
to voice mail depending on your device
Transfer a call between
Headset and Bluetooth device
Power on
Linked
On a call
Transfers the call from
one device to another
Voice activated dialing
Power on
Linked
No call
Activates the voice recognition feature
heAdset stAtUs heAdset stAtUs indicAtor
Powering on Blue light appears and flashes every 6 seconds
Power on Blue light flashes every 6 seconds
Powering off Red light appears and goes off
Power off Indicator is not lit
Charging battery Red light is on
Battery fully charged Red light is off
Discovery state Indicator flashes blue and red for 30 seconds
Missed call
Infrequent flashing blue/red
Press any button to cancel
Ringing Rapid flashing blue/red
On Line Indicator (OLI) Blue flash every 10 seconds
Low battery Flashes red
statUs inDicators
troUBlEsHooting
PossiBle cAUse solUtion
Headset was not in discovery mode when
mobile phone menu selections were made.
See page 5 “Bluetooth Pairing”.
Incorrect menu selections were
made on your cellular phone.
See page 5 “Bluetooth Pairing”.
mY HEaDsEt DoEs not Work WitH mY
PHonE.
PossiBle cAUse solUtion
Mute is turned on.
Press both sides of the
volume/mute button simultaneously.
callErs cannot HEar mE.
PossiBle cAUse solUtion
The headset is not turned on.
Press the call control button for 2 seconds until you hear
a beep or see the headset status indicator glow blue.
Your headset is out of range.
Move the headset closer
to the phone or Bluetooth device.
Your headset battery is flat.
Charge your battery using the AC
power adapter supplied.
The listening volume is too low.
Press the top part of the volume/mute button
to increase the sound heard in the headset.
i cannot HEar callEr/Dialling tonE.
i DiD not EntEr mY Pass kEY.
PossiBle cAUse solUtion
Your phone did not locate the headset. Repeat the Pairing process on page 5.
Incorrect menu selections were
made on your cellular phone.
Repeat the Pairing process on page 5.