Edimax Technology IR-123E - Manual (Page 32)

29
have to input PPPoE username and password assigned by
network operator to get connected.
HTTP Port Input IP camera’s web connection port number here.
When this port number is changed, you need to change
web browser’s port number you used to connect to IP
camera.
For example, IP camera’s IP address is 192.168.2.3, and if
you changed HTTP port number to 82, please input
‘http://192.168.2.3:82’ in web browser’s address bar to
access IP camera’s web configuration interface.
RTSP Port Input RTSP port number. When this port number changes,
you must change corresponding settings in external
network devices (NVR or CMS software) so they can
receive this IP camera’s video.
RTP Data Port Input RTP data port number here.
When you finish with above settings, click ‘Apply’ button to save changes.