Edimax Technology IR-123E - Manual (Page 60)

57
3-14 Maintenance
You can do some maintenance job about this IP camera here.
Here are the descriptions of every setup item:
Item Description
Reboot Click this button to reboot the IP camera. This
function is useful when you find IP camera is not
working properly.
Reset Clear all settings of IP camera and reset to factory
default setting.
Backup Backup IP camera’s setting and save it on your
computer.
Backup to
Micro SD card
device Backup IP camera’s setting and save it on Micro SD
card. A Micro SD card must be inserted into Micro SD
card slot when you click this button, or you’ll receive
an error message.
Restore Restore a previously-saved configuration file saved
on your computer. Click ‘Browse’ button to select a
file on your computer first, then click ‘Restore’