Edimax Technology IR-123E - Manual (Page 41)

38
Here are the descriptions of every setup item:
Item Description
H.264
/MPEG4 Select the compression of main stream: H.264 / MPEG4.
Video
Resolution Select video resolution.
- H.264:
2048x1536 (QXGA) / 1920x1080 (1080p)
1280x960 (960p) / 1280x720 (720p)
720x480 (D1) / 640x480 (VGA)
320x240 (QVGA)
- MPEG4:
1920x1080 (1080p) / 1280x960 (960p)
1280x720 (720p) / 720x480 (D1)
640x480 (VGA) / 320x240 (QVGA)
MJPEG:
1280x720 (720p) / 720x480 (D1)
640x480 (VGA) / 320x240 (QVGA)
Please note that some video resolution is not available
when video encoder is ‘MPEG4’.
When network speed is insufficient, select a lower video
resolution will help.
Frame Rate Select video frame rate. Please note that some frame
rate is not available when video encoder is ‘H.264’.
When network speed is insufficient, select a lower frame
rate will help.
Rate
Control Select video bit rate. You can control bit rate by both
‘Video quality’ and ‘Bitrate’:
- Video quality: There are 5 levels of video quality,
select ‘very high’ to improve video quality but
consumes more network bandwidth, and select ‘very
low’ will decrease video quality and consumes less
network bandwidth.
- Bitrate: Input video’s bit rate directly. It must an
integer between 512 and 4000. Higher bit rate
provides better video quality, but consumes more
network bandwidth.
When you finish with above settings, click ‘Apply’ button to save changes.
Note:
MJPEG options are only available for portable devices like cell phone.