Hama MW1002 - Manual (Page 35)

Operation
Switching the device on and off
To switch on the device, press and hold the “+/ ”
button [7] for approx. 3 seconds or slide the faceplate
upwards.
To switch off the device, slide the faceplate downwards
and press and hold the “+/ ” button [7] for approx. 4
seconds.
Changing the settings
Slide the faceplate downwards.
Press and hold the MODE button [6] until the device
beeps.
Press MODE repeatedly until the following symbol is
displayed:
CLOCK [3] –– For setting the time
UNIT [14] –– For setting the unit of measurement
ASC [11] –– For automatic sensor cleaning
CLEAN [4] –– For cleaning
Press the SET [8] button to activate the selected function.
NOTE
If no button is pressed for approx. 1 minute, the
device ends the settings mode and displays the
time. ►
u
u
u
u
u
u
GB
35 MW-1002
00087697bda_neu.indd 35 00087697bda_neu.indd 35 03.08.2009 9:58:08 Uhr 03.08.2009 9:58:08 Uhr