Hama MW1002 - Manual (Page 41)

GB
41 MW-1002
NOTE
If the device does not detect a breath sample within
5 seconds after the countdown is complete, it beeps
for an additional 10 seconds. In order to perform
the alcohol test, you must press the SET button [8]
while blowing into the device.
If the device still does not detect a breath sample,
ERROR [15] and ERR appear in the display (1) and
the device beeps several times. Restart the alcohol
test by pressing the SET button [8] or by sliding the
faceplate down and back up again. ►
►
The device automatically initiates the cleaning process after
each test.
Press the SET button [8] if you wish to perform another
test.
Remove the plastic tube from the mouth piece and slide
the faceplate downwards in order to end the alcohol
test.
Clean the used plastic tube. u
u
u
00087697bda_neu.indd 41 00087697bda_neu.indd 41 03.08.2009 9:58:18 Uhr 03.08.2009 9:58:18 Uhr