Hama BC-500D - Manual (Page 19)

Basic safety instructions
Observe the following safety instructions to ensure safe handling of
the device:
■ The device should only be assembled by adults. Keep small parts
out of reach of children during assembly.
■ Do not let children play with parts of the device or the device itself.
Ensure that the baby monitor units, power supply adapter and
connection cable are always kept out of reach of babies.
■ Never cover the device (e.g. with a towel or blanket).
■ Faulty components may be replaced with original spare parts only.
Only original spare parts can guarantee that applicable safety
requirements are adhered to.
Design and functionality
The baby monitor is comprised of one parent unit and one baby unit.
The units communicate with each other over a wireless connection.
The transmission frequency is 2.4 GHz.
Both visual (video camera) and acoustic surveillance (microphone) are
possible.
The data recorded by the camera and microphone on the baby unit are
transmitted to the parent unit and shown on the display and over the
loudspeaker. The volume of the transmitted sounds is also indicated
by the LEDs.
NOTE
► The baby monitor is only intended as a support aid, and is not a
substitute for responsible and proper care by an adult.
Parent unit (fi g. 1)
1 Antenna
2 Energy status LED
3 Loudspeaker
4 Control keys ( / /MENU)
5 Display
6 Volume
LEDs
7 Socket for power supply
adapter
8 On/off switch
9 VOX switch
10 Key LINK
Baby unit (fi g. 2)
1 Antenna
2 Infrared night vision LEDs
3 Microphone
4 Camera
lens
5 Rotary handle for camera
6 Energy status LED
7 LINK key
8 On/off
switch
9 Socket for power supply
adapter
36 Baby-Control BC-500D
GB
37 Baby-Control BC-500D
GB
00092662man_de_en_es_fr_pl_ru.indd Abs3:36-Abs3:37 00092662man_de_en_es_fr_pl_ru.indd Abs3:36-Abs3:37 08.02.10 07:57 08.02.10 07:57