Hama BC-500D - Manual (Page 22)

Positioning the parent unit
Swivelling base
The base can be rotated 360° and tilted by up to 70°.
Fastening clip
ª Insert the fastening clip into
the holder and slide it in until it
locks into place.
ª Release the catch and remove
the fastening clip from the
holder.
Wall mounting
Both the baby unit and parent unit can be wall-mounted. Each unit is
equipped with a fastening hole (1) for this purpose. The fastening clip
must be attached in order to mount the baby unit onto the wall.
Electrical connection
Inserting the batteries
Baby unit:
Parent unit:
ª 1. Loosen the mounting screw on the battery compartment cover.
ª 2. Open the battery compartment.
ª 3. Insert the batteries or rechargeable batteries. Ensure that the
polarity is correct.
CAUTION
Material damage may result from using non-rechargeable
batteries in the parent unit!
Observe the following safety instructions to avoid these dangers.
► Only use rechargeable AA batteries in the parent unit.
NOTE
► Do not use empty batteries and new batteries at the same time..
42 Baby-Control BC-500D
GB
1
1
43 Baby-Control BC-500D
GB
1
00092662man_de_en_es_fr_pl_ru.indd Abs3:42-Abs3:43 00092662man_de_en_es_fr_pl_ru.indd Abs3:42-Abs3:43 08.02.10 07:57 08.02.10 07:57