RIDGID K-1000 - Manual (Page 5)

K-1000 Rodder
5
Rods
Catalog
No.
Model
No. Description
60355 A-2474 3' (0,9 m)Solid Sectional Rod, includes R-1 Male
and R-2 Female Couplings
60360 A-2475 5' (1,5 m) Solid Sectional Rod, includes R-1
Male and R-2 Female Couplings
60365 A-2475 10' (3,0 m) Solid Sectional Rod, includes R-1
Male and R-2 Female Couplings
Tools and Replacement Blades
Catalog
No.
Model
No. Description
62045 T-300 Spear Head
62050 T-301 Round Stock Corkscrew, 1 1 /
2
” (30 mm)
62055 T-302 Round Stock Corkscrew, 2” (50 mm)
62060 T-303 Round Stock Corkscrew, 2 1 /
2
” (65 mm)
62065 T-304 Round Stock Corkscrew, 3” (75 mm)
62070 T-305 Round Stock Corkscrew, 3 1 /
2
” (90 mm)
62075 T-306 Double Corkscrew, 3” (75 mm)
62080 T-307 Double Corkscrew, 4” (100 mm)
62085 T-308 Double Corkscrew, 5” (125 mm)
62090 T-309 Square Stock Corkscrew, 3” (75 mm)
62095 T-310 Square Stock Corkscrew, 4” (100 mm)
62100 T-311 Square Stock Corkscrew, 5” (125 mm)
62105 T-312 Square Stock Corkscrew, 6” (150 mm)
62370 T-313 Square Stock Corkscrew, 8” (200 mm)
62375 T-314 Square Stock Corkscrew, 10” (250 mm)
62380 T-315 Square Stock Corkscrew, 12” (280 mm)
62110 T-316 Auger, 3” (75 mm)
62115 T-317 Auger, 4” (100 mm)
62120 T-318 Auger, 5” (125 mm)
62125 T-319 Auger, 6” (150 mm)
62385 T-320 Auger, 8” (200 mm)
62390 T-321 Auger, 10” (250 mm)
62140 T-326 Pick-Up Tool
Description, Specifications and
Standard Equipment
Description
The RIDGID Model K-1000 Rodder is a gasoline, engine-
driven machine for cleaning straight line work in sewer
mains, drain tile, water mains and process piping. Will
clean drains 8” to 24” (200 mm - 600 mm) in diameter
and 500 feet (152 m) in length. The machine uses sec-
tional solid rods that have a quick coupler for connect-
ing or disconnecting tools and rods.
Specifications
Line Capacity..................................... 8” – 24” (200 mm - 600 mm) dia.
Drain/Sewer Line
Transmission (2 speed):
FWD Gear...................... 133 RPM
133 RPM
REV Gear........................
Throttle................................................ Variable speed, returns
speed to idle when operator
releases grip
Engine.................................................. 4 cycle, gasoline, 6hp
Vertical shaft
Clutch................................................... Centrifugal clutch open when
operator releases throttle
Length................................................. 32” (81 cm)
Width.................................................... 26” (66 cm)
Height (assembled
with handle........................................ 40” (102 cm)
Weight
Machine only.................................... 160 lbs. (73 kg)
Standard Equipment
Catalog
No.
Model
No. Description
59175 K-1000 Rodder Machine, includes:
– B-3542 Rod Driver
– A-2704 Tool Driver
– A-3567 Drive Pin
– R-0 Rod Turner
– A-4558 Torque Adapter
– A-12 Coupling Pin Key
– A-1 Operator’s Mitt (LH)
– A-2 Operator’s Mitt (RH)
84295 K-1000 Rodder Machine, same as above, plus:
– 20 Sections of A-2475,
5 /
16
” (8 mm) Rod, Total
of 100 feet (30 m)
– T-300 Spear Head Cutter
– T-317 Auger
– T-326 Pick-Up Tool