RIDGID KJ-3000 - Manual (Page 5)

KJ-1590 II, KJ-2000, KJ-3000
Ridge Tool Company 4
Jetter Nozzle Selection*
KJ-2200 KJ-2200 KJ-1590 II KJ-3000 KJ-1590 II KJ-3000
Thread size ¼” NPT 1/8” NPT ¼” NPT ¼” NPT
Hose size ½” 1/8” & ¼” ½” 3/8”
Hose inside diameter ¼” 1/8” & 3/16” ¼” 3/8”
Features three reverse jet thrusts for maximum
propulsion to jet long distances.
Use this nozzle for most applications. 64787
(H-71) 64772
(H-61) 64802
(H-81) 64802
(H-81) 58436 64817
(H-91)
Uses three jet thrusters in reverse plus one jet pointed
forward to penetrate solid grease or sludge blockages.
The forward jet blasts a small hole in the blockage for
the nozzle to follow. Very eff ective when jetting ice
blockages. 64792
(H-72) 64777
(H-62) 64807
(H-82) 64807
(H-82) 58446 64822
(H-92)
Use the drop head nozzle to help negotiate diffi cult
bends. This nozzle has three reverse jet thrusts.
64782
(H-64) 64812
(H-84) 64812
(H-84)
Jetter Hose Suggestion Chart*
KJ-1590 II and KJ-2200
Applications Pipe size Nozzle size Hose size Hose ID
Bathroom sinks, urinals and small lines 32 - 51 mm 1/8” NPT 3/16” 1/8”
Kitchen sinks, laundry tubs and stacks,
clean-outs and vents
51 - 77 mm 1/8” NPT ¼” 3/16”
Shower and fl oor drains, lateral lines
and grease traps
77 - 100 mm ¼” NPT ½” ¼”
Lateral and main lines 100 - 150 mm ¼” NPT ½” ¼”
KJ-3000
Applications Pipe size Nozzle size Hose size Hose ID
Kitchen sinks, laundry tubs and stacks,
clean-outs and vents
51 - 77 mm 1/8” NPT ¼” 3/16”
Shower and fl oor drains, lateral lines
and grease traps
77 - 100 mm ¼” NPT 5/8” 3/8”
Lateral and main lines 100 - 150 mm ¼” NPT 5/8” 3/8”
* The outside diameter is mentioned on the hose.