SoundMax SM-CMD3016 - Manual (Page 14)

14
General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press RESET
button (hole) with a pointed object, such as a ballpoint pen, to set the unit to initial state.
Note: When some errors occur, you can also press RESET button to resume to normal, and it will erase some
memorized functions.
Turning the unit on/off
Press any button on the panel or the RC (except OPEN button) to turn on the unit. Press and hold POWER/TFT
OFF button on the panel or press POWER button on the RC to turn off the unit.
Mode selection
Repeatedly press MOD/MUT button on the panel or MODE button on the RC to select a mode: Radio => Disc
=> USB => Memory card => AUX.
Note: The Disc, Card and USB modes are only available when corresponding storages are connected to the
unit.
Mute function
Press MUTE button on the RC or press and hold MOD/MUT button on the panel to turn off the sound. “MUTE
ON” appears on the display. Press the button again or adjust volume to resume the sound output.
Volume control
Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to decrease or increase sound
volume level.
Setting the sound characteristics
Press repeatedly SELECT button on the panel or SEL button on the RC to select the audio setting: VOL
(volume) => BAS (bass) => TRE (treble) => BAL (balance) => FAD (fader). Press VOL+/VOL- buttons on
the RC or rotate VOLUME regulator on the panel to adjust the selected item. Balance is to adjust the balance