SoundMax SM-CMD3016 User Manual
Page 19
19
PTY/PLAY/PAUSE button to show the music type. Then press 1 - 6 number buttons to choose di
grams available.
PTY/PLAY/PAUSE button twice to show the speech type program. Then press 1 - 6 number butt
erent speech programs. Each number button will show 2 or 3 different speech pro
choose: Pop, Rock, Easy, Light, Classics, Other, Jazz, Country, Nation, Oldies, Folk, News, Affairs, Info,
Sport, Educate, Drama, Culture, Science, Varied, Weather, Finance, Children, Social, Religion, Phone IN,
Travel, Leisure, Document).
When PTY is selected, the radio starts to search corresponding PTY information, and stops if the
corresponding PTY information is detected. If no buttons are pressed within several seconds, previously
selected PTY is searched. During 1 loop, if desired PTY is not found, the unit will return to previous mode.
Press PTY/PLAY/PAUSE button for the 3rd time to switch the PTY function off.
Other parameter setting
To choose the corresponding parameter, press and hold SELECT button on the panel or SEL button on the RC,
then press it repeatedly until the display shows the needed parameter. Press VOL+/VOL- buttons on the RC
or rotate VOLUME regulator on the panel to choose the needed option. After choosing, please leave the unit
idle to activate.
TA ALARM/TA SEEK: In TA SEEK mode, the unit will seek for traffic announcement program; in TA ALARM
mode the alarm is set off.
PI SOUND/MUTE: Choose either PI sound or PI mute. PI sound refers to the reception noise when the AF
function tries to scan alternative frequency.
RETUNE S/L: RETUNE refers to the time period the unit allows for radio scan when reception is
interrupted. SHORT represents a time period of 30 seconds and LONG represents a time period of 90
seconds.
MASK DPI/ALL: During MASK DPI mode, the unit will mask only the AF which has different PI, this is the
default mode; during MASK ALL mode, the unit will mask the AF which has different PI and no RDS signal
with high field strength.