SoundMax SM-CMD3016 - Manual (Page 23)

23
needed settings. Press ENTER button on the RC or 5/STOP/ENTER button on the panel to start playback from
the set number or time.
Programming the playback
Press PROG button on the RC to open program menu.
Use cursor buttons to select the program position and use number buttons to input the desired
track/title/chapter (depending on the disc type).
Press PLAY/PAUSE button to start program play, or move the cursor to select PLAYING and press ENTER
button on the RC or 5/STOP/ENTER button on the panel to play.
Move the cursor to CLEAR, press ENTER button on the RC or 5/STOP/ENTER button on the panel to delete
the programmed list. Press PROG button to quit programming.
OSD (On Screen Display) function
Press OSD button on the RC or press and hold 1/OSD/LEFT button on the RC repeatedly to show current
playback information, such as number of track/chapter/title, current track/chapter/title time
elapsed/remaining, total track/chapter/title time remaining (depending on the disc type).
Zooming in/out
During playback of video or images, press repeatedly ZOOM button on the RC, the picture will be zoomed in
the sequence: X2 =>X3 =>X4 =>X1/2 => X1/3 => X1/4 => Normal. When the image is zoomed in, you can
move it by pressing cursor buttons.
Slow playback
During playback press repeatedly SLOW button on the RC to select the speed of slow playback: 1/2 => 1/3
=> 1/4 => 1/5 => 1/6 => 1/7 => Normal. While slow playback, press and hold 6/SET/PAU button on the
panel or PLAY/PAUSE button on the RC to resume normal playback.
PBC (Playback Control) function (for VCD only)
This function is only available for the VCD with PBC function. Press and hold MEN/PBC button on the RC to set
PBC on/off; when PBC is off, the screen will show PBC menu if you switch PBC on. If the menu consists of a
list of titles, you can select a desired one using number buttons on the RC.