SoundMax SM-CMD5003G - Manual (Page 15)

15
Page 2
Bass: Adjust the low-frequency level.
Treble: Adjust the high-frequency level.
Balance: Adjust the balance between left and right channels.
Fader: Adjust the balance between front and left channels.
Page 3
Beep: Select ALL (beep is heard at any button pressing), 2ND (beep is heard when a button is pressed
and held) or OFF (no beep).
Loud: Selecting loudness ON will emphasize the low frequency output.
Subwoofer: set the subwoofer on or off.
Note: You can also press SEEK-/ and SEEK+/ on the RC to select menu pages; press UP/DOWN cursor
buttons to select a setting, press LEFT/RIGHT buttons to adjust the setting.
Mute function
Press MUTE button on the RC or PWR button on the unit to turn off the sound. Press the button again or
adjust volume to resume the sound output.
Mode selection
Repeatedly press MODE
button on the RC or on the
panel to select an
operation mode.
In any mode press MENU
button to display the Main
menu consisting of two
pages:
In the menu, touch the item of the mode you need to select the corresponding mode. Touch the arrow icon
in the right part of the screen to switch between the 2 menu pages.
Note: The DVD, USB and SD modes are only available when a disc, USB or SD/MMC card is inserted into the
unit.