SoundMax SM-CMD5003G - Manual (Page 18)

18
DX: Select LOCAL (only local station reception) or DX (local and distant station reception). The function is
available only in FM bands.
TA: Seek/Alarm. In TA SEEK mode, the unit will seek for traffic announcement program when TA is
pressed; in TA ALARM mode, no TA/TP is displayed and the alarm is set off.
Page 2
EON TA: DX/Local. If you want to receive information from local stations only, select EON TA Local mode.
Otherwise, select EON TA DX mode.
REG: REG ON (the receiver accepts regional variants of the tuned station with REG icon turned on), and
REG OFF (the receiver ignores regional variants).
PI: Mute/Sound. PI sound refers to the reception noise when the AF function tries to scan alternative
frequency.
Retune: RETUNE refers to the time period the unit allows for radio scan when reception is interrupted.
“SHORT” represents a time period of 30 seconds and “LONG” represents a time period of 90 seconds.
Mask: DPI/ALL. During MASK DPI mode, the unit will mask only the AF which has different PI, this is the
default mode; during MASK ALL mode, the unit will mask the AF which has different PI and no RDS signal
with high field strength.
Page 3
Radio Area: Select the radio broadcast area (Europe/USA/ASIA/SOUTH AMERICA).
System page
In this menu you can see the current version information.
Calibration page
“Carefully press and hold stylus on the center of the target. Repeat as the target moves around the screen” is
displayed. Touch and hold the cross in each position until it moves to a different position. After repeating it 4
times, the calibration of the screen is complete; touch the screen anywhere to return to menu. The
calibration procedure is useful when some malfunction occur with the touch screen, and it needs adjustment.