SoundMax SM-CMD5003G - Manual (Page 30)

30
Intro playback
Press INT button on the RC to activate introduction function. Several initial seconds of each track will be
played. Press the button again to cancel intro playback.
GOTO
Press and hold AUDIO/GOTO button to show the playback parameters for the current chapter/track/time
(track/title/chapter number or time). Press cursor buttons to navigate between the parameters and use
number buttons to input needed settings. Press ENTER button on the RC to start playback from the set
number or time.
Random playback
Press BND/RDM button on the RC to activate random playing mode. Press one more time to return to normal
playing.
OSD setting (for DVD)
Press OSD button to display the current playback information.
Zooming in/out
During playback of video or images on disc/USB/SD/MMC, press and hold repeatedly A-B/ZOOM button on
the RC, the picture will be zoomed in the sequence: Zoom2 => Zoom3 => Zoom4 => Zoom1/2 => Zoom1/3
=> Zoom1/4 => Normal.
PBC (Playback Control) (for VCD only)
This function is only available for the VCD with PBC function.
Press and hold STOP/PBC button on the RC to set PBC on/off; when PBC is off, the screen will show PBC
menu if you switch PBC on. If the menu consists of a list of titles, you can select a desired one using number
buttons on the RC.
Changing angle (for DVD only)
Press ANGLE button on the RC to playback images at different camera angles. If a disc doesn’t support multi-
angle playback, this function will not work.