Plantronics SupraPlus Wireless - Manual (Page 18)

18
GB 3. REGISTERING yoUR
hEAdSET
Prior to using your C351N headset for
the first time, you MUST register(1) it
with your DECT™ telephone.
Before attempting to register the
C351N headset, first read the
instructions for registering a new
DECT™ handset in the manual
supplied with your DECT™ telephone.
The process for registering the C351N
headset will be very similar and the
information below describes the
registration sequence for a typical
DECT™ telephone.
1. Change the system Authentication
code of your DECT™ telephone to 0000
to match the preset PIN of the C351N
headset. Your DECT™ telephone
manual will describe how to do this.
Note: Many DECT™ telephones
already use 0000 as their default
Authentication code, so you may not
need to change it.
2. Place the DECT™ telephone base
in subscription mode by following the
instructions in your DECT™ telephone
manual.
3. Do not follow the DECT™ telephone
manual instructions to place the
handset in registration mode as this
will register the handset rather than
the headset.
Instead, activate headset registration
mode by PRESSING the Mute Control
as if to activate Mute (see Fig 4.2) but
HOLDING until the ON-LINE indicator
illuminates.
4. Complete registration by following
any remaining instructions in your
DECT™ telephone manual.
Important: Your DECT™ telephone
system must comply with the Generic
Access Protocol (GAP) standard to
work with the C351N headset. Most
modern DECT™ systems comply with
the GAP specification, but some older
systems may not. If in doubt, check
the documentation supplied with your
DECT™ telephone.
For more information, visit www.
plantronics.com which provides a
list of compatible DECT™ telephone
systems and provides detailed headset
registration instructions for the most
common models of DECT™ telephone.
(1) Registration is sometimes also
referred to as subscription or pairing.
dE ABBILdUNGSSChLüSSEL
hEAdSET
1. Austauschbares, bequemes
Ohrkissen
. Ersatz-Ohrkissen
 . Gesprächsanzeige
 . Lautstärkeregelung
. Sprechtaste
. Noise Cancelling-Mikrofon
7. Stummschaltung
. Akkuabdeckung
dER BASISSTATIoN
9. Netzgerät
10. Anschluss für das Netzgerät
11. Headset-Ladestation
12. Ladekontakte
13. Ladeanzeige
14. Netzspannungsanzeige
15. Modul der Tischladestation
ERSTE SChRITTE
Um Ihr DECT™-Headset-Systems
C351N von Plantronics in Betrieb zu
nehmen, führen Sie die folgenden
einfachen Schritte aus:
1. Installieren Sie die C351N-
Basisstation.
. Laden Sie den Headset-Akku auf.
. Registrieren Sie das Headset an
Ihrem DECT™-Telefon.