Maintenance procedures – FIAT Freemont User Manual

Page 226

Advertising
background image

MAINTENANCE PROCEDURES

The pages that follow contain the required mainte-
nance services determined by the engineers who de-
signed your vehicle.

Besides those maintenance items specified in the fixed
maintenance schedule, there are other components
which may require servicing or replacement in the
future.

• Failure to properly maintain your ve-
hicle or perform repairs and service when
necessary could result in more costly re-

pairs, damage to other components or negatively
impact vehicle performance. Immediately have
potential malfunctions examined by an autho-
rized dealership or qualified repair center.
• Your vehicle has been built with improved fluids
that protect the performance and durability of
your vehicle and also allow extended mainte-
nance intervals. Do not use chemical flushes in
these components as the chemicals can damage
your engine, transmission, power steering or air
conditioning. Such damage is not covered by the
NewVehicle LimitedWarranty. If a flush is needed
because of component malfunction, use only the
specified fluid for the flushing procedure.

ENGINE OIL

Checking Oil Level – 2.0L Diesel Engine
To assure proper engine lubrication, the engine oil
must be maintained at the correct level. Check the oil
level at regular intervals, such as every fuel stop.

The best time to check the engine oil level is about five
minutes after a fully warmed engine is shut off or
before starting the engine after it has sat overnight.

Checking the oil while the vehicle is on level ground will
improve the accuracy of the oil level readings. Maintain
the oil level between the MIN and MAX markings on
the dipstick. Adding 1.0 qt (1.0 l) of oil when the
reading is at the MIN mark will result in a MAX reading
on these engines.

Change Engine Oil – 2.0L Diesel Engine
Refer to the “Maintenance Schedule” for the proper
maintenance intervals.

Engine Oil Viscosity – 2.0L Diesel Engine
For best performance and maximum protection under
all types of operating conditions, the manufacturer
recommends Fully Synthetic Low Ash 5W-30 engine
oils that meet the requirements of FIAT 9.55535-S1
spec and ACEA C1/C2.

Materials Added To Engine Oil
Do not add any supplemental materials, other than leak
detection dyes, to the engine oil. Engine oil is an
engineered product and its performance may be im-
paired by supplemental additives.

219

KNOWING
YOUR
VEHICLE

SAFETY

STARTING
AND
DRIVING

WARNING
LIGHTS AND
MESSAGES

IN AN
EMERGENCY

SERVICING

AND

CARE

TECHNICAL
SPECIFICATIONS

CONTENTS

Advertising