Sony SLV-SE230G - Manual (Page 46)

46 Recording TV programmes using the VIDEO Plus+ ® system
2 Press the programme number
buttons to enter the PlusCode
number.
If you make a mistake, press
CLEAR and re-enter the correct
number.
3 Press OK.
The date, start and stop times,
programme position, tape speed and
PDC setting appear on the TV
screen.
• If “– –” appears in the “PR”
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate
programme position manually.
Press
M/m to select the desired programme position.
• To record from other equipment connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line
in the “PR” position.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
4 If you want to change the date, tape
speed and the PDC setting:
1 Press </, to select the item
you want to change.
2 Press M/m to reset it.
• To record the same programme
every day or the same day every
week, see “Daily/weekly
recording” on page 47.
• To use the PDC function, set V/P to ON. For details about the
PDC function, see “Timer recording with PDC signals” on
page 47.
5 Press MENU to exit the menu.
1 2 3
4 5 6
7 8 9
0
CLEAR
M E N U : O K : S E T
C O D E 0 – 9
V I D E O P L U S
C O D E 1 2 3 4 – – – – –
:
E X I T
CLEAR
OK
INPUT SELECT
S E T
M E N U :
:
O K : E N D
S E L E C T
– – – – – – – – – – – – – – – : :
3 5 S A 2 9 1 9 0 0 2 0 0 0 : :
– – – – – – – – – – – – – –
–
– : :
– – – – – – – – – – – – – – – : :
– – – – – – – – – – – – – – – : :
– – – – – – – – – – – – – –
–
SP
–
–
–
–
– : :
:
E X I T
P R D A Y S T A R T S T O P V/P
OK
S E T
M E N U :
:
O K : E N D
S E L E C T
– – – – – – – – – – – – – – – : :
P R D A Y S T A R T S T O P V/P
3 5 S A 2 9 1 9 0 0 2 0 0 ON 0 : :
– – – – – – – – – – – – – – – : :
– – – – – – – – – – – – – – – : :
– – – – – – – – – – – – – – – : :
– – – – – – – – – – – – – –
–
SP
–
–
–
–
– : :
:
E X I T
MENU