Sony SLV-SE230G - Manual (Page 53)

70 Troubleshooting
Pla
y
bac
k
The sound from a tape
recorded with the VCR is
not in stereo or the
STEREO indicator in the
display window is
flashing. • Adjust the tracking.
• The video heads are dirty. Clean the video heads using a
Sony video head cleaning cassette as explained above.
Rec
o
rd
ing
No TV programme
appears on the TV
screen. • Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
• Existing broadcasts may interfere with the VCR. Reset the
RF channel output of your VCR (see page 20).
• Select the correct source with the INPUT SELECT button.
Select a programme position when recording TV
programmes; select a line input when recording from other
equipment.
TV reception is poor. • Make sure the aerial cable is connected securely.
• Adjust the TV aerial.
The tape starts playing as
soon as it is inserted. • The safety tab has been removed. To record on this tape,
cover the tab hole (see page 38).
The tape is ejected when
you press z REC. • The safety tab has been removed. To record on this tape,
cover the tab hole (see page 38).
Nothing happens when
you press z REC. • Make sure the tape is not at its end.
Timer re
cor
d
ing
The timer does not
operate. • Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer recording.
• Make sure your timer settings are past the current time.
• Check that the digital tuner is turned on.
• Check that the satellite tuner is turned on.
• The clock stops if the VCR is disconnected from the mains.
Reset the clock and timer.
• Turn the power off and unplug the mains lead.
The VIDEOPLUS menu
or the TIMER
PROGRAMMING menu
does not appear. • Check that TIMER METHOD in the EASY OPERATION
menu is set correctly (see page 64).
Symptom Remedy