HONDA 2012 CR-Z Navigation - Manual (Page 39)

38 Navigation System
CR-Z_KA 31SZT810
If desired, use the ZOOM buttons to
change the map scale. When you have
the crosshairs on the desired icon, map
feature, or road, push in on the joystick.
The address of the location will appear
at the top of the screen.
NOTE:
The selected icon or road segment is
displayed on the 1/2 mile (800 meter) or
less map scale.
If this is the desired destination, push in
on the joystick again. If not, use the
joystick to reposition the crosshairs,
then push in on the joystick again to
display the new address.
If you selected a single icon or road
segment within the target mark, the
following screen appears. Push in on the
joystick again to calculate a route to the
selected destination. If you selected multiple icons within the
cursor radius, the following screen
appears. Select an item from the list.
Then select
OK to calculate a route to
the selected destination.
Once you select an address, the system
then displays the
Calculate route to
screen (see Driving to Your Destination
on page 46).
Entering a Destination
00 CR-Z_KA.book 38 ページ ２０１１年８月９日 火曜日 午後４時１７分