Driving to your destination – HONDA 2012 CR-Z Navigation User Manual

Page 49

Advertising
background image

48

Navigation System

CR-Z_KA 31SZT810

Viewing the Routes
Touching

View Routes on the

Calculate route to screen allows you to
scroll through and view the various
routes (Direct, Easy, Maximize
Freeways, etc.) to your destination. If
you select

View Routes, the display

changes to:

NOTE:
• You may only view routes as shown

above from the

Calculate route to

screen.

• The selected route method is shown at

the top of the screen.

• It may take several minutes (the

system displays an hourglass while it
is calculating) to show all route
methods, and it is not unusual for the
different methods to pick the same
route. Voice commands cannot be
used while the system is calculating.

• If the trip is greater than 100 miles,

then “Minimize Freeways” and
“Minimize Toll Roads” may be
grayed out. This is normal.

Say or select

Summary to display the

distance and time to go for each route.
Based on the route data, you can change
the routing by using the

Next and Prev.

buttons. Once you confirm your
selection, say or select

OK on the

screen.

NOTE:
Distances and times shown for each
method in the Summary are
approximate.

After calculating the route with the new
method, the system displays a map of
your current location. The calculated
route will be highlighted as a blue line,
and a voice prompt will tell you how to
proceed along the highlighted route.
Touch

VOICE to have the guidance

repeated.

Driving to Your Destination

00 CR-Z_KA.book 48 ページ 2011年8月9日 火曜日 午後4時17分

Advertising
This manual is related to the following products: