System set-up – HONDA 2008 Accord Navigation User Manual

Page 100

Advertising
background image

100 Navigation System

System Set-up

System Information

From the SETUP screen (Other), say
or select System Information and the
following screen appears:

Displays the information on the
navigation system software. This
information is for dealer use only. For
ordering updates, use the version
number stamped on the label (as Ver.
X.XX) of the navigation DVD. See
Obtaining a Navigation Update DVD on
page

108

.

When finished, say or select Return to
return to the previous screen.

Rear View Camera (if
equipped)

If equipped, whenever you shift to R
(Reverse) with the ignition switch in the
ON (II) position, the rear view is shown
on the navigation system screen. For the
best image, always keep the rear view
camera lens clean, and be sure it is not
covered.

Since the rear view camera display area
is limited, you should always back up
slowly and carefully, and look behind
you for obstacles.

Rear View Camera Brightness
Adjustment

When in reverse, the Navi “hard”
buttons are locked out, except the
rotating portion of the Interface Dial
(knob). Rotate the knob clockwise to
make the camera image brighter, and
counterclockwise to darken the image.
This brightness adjustment is
independent of the screen brightness
adjustment in Setup.

NOTE:
• The camera brightness cannot be

adjusted by voice control.

• Slight delays can occur when

switching to the camera image, or
switching back to the

map/menu

screen. This is normal.

2008 Accord

Main Menu

Advertising
This manual is related to the following products: