HONDA 2008 Accord Navigation - Manual (Page 27)

Navigation System 27
Entering the Street Number
After you have completed the street
name, the display changes to the Enter
street number screen. Use the voice
control system and say the address
number as a continuous string of
numbers. For example, the address 1527
should be spoken as “One, five, two,
seven.” You can also use the Interface
Dial to enter the street number.
Some address numbers may not be
available on the selected street. For
example, let’s say the individual address
ranges for a selected street name are 1 -
20, and 9,000 - 10,000 with an overall
range shown on the display of 1 to
10,000. If you try to enter a number
outside the individual address ranges
such as 500, the system will show this
number as un-available (grayed out).
• When using the Interface Dial, the
system only allows you to choose
available address numbers.
• When using voice control, the system
beeps if you try to select an un-
available (grayed out) address
number.
If you did not select a city in the
beginning, the street name you selected
might appear in more than one city. The
system will give you a list of cities that
the street appears in. Select the desired
city from the list. The system then
displays the Calculate route to screen
(see Driving to Your Destination on
page
45 ).
Tip:
If the particular address you want
cannot be found, select
Map Input on
the MENU screen (Enter destination
by) and use the Interface Dial to select
the appropriate location on the map
(see By Map Input on page
40 ).
Select View Dest. Map and use the
Interface Dial to select an icon,
approximate area, or street you wish to
choose as your destination. Otherwise, a
central location of the street will be
selected. If you select a point of interest
(POI) or road in an unverified area, you
may or may not have routing in these
areas. See Map Overview on page
6 .
By Address Book
This selection allows you to choose a
personal address entry for a destination.
After you select Address Book from
the MENU screen (Enter destination
by), the display changes to:
If an Address Book PIN has been set
in SETUP, the system prompts you to
enter your PIN after you select User 1
or User 2. Say or enter your PIN.
If the PIN has not been entered, the
system displays the list after you select
User 1 or User 2.
Entering a Destination
2008 Accord
Main Menu