JVC KW-AV61BT - Manual (Page 28)

28
ENGLISH
Setting iPod control mode
Select the unit controlling iPod/iPhone playback.
When the source is “iPod”...
1
2
Head Controls playback from this unit.
(☞ page 29)
iPod Controls audio/video playback from
the iPod/iPhone.
• Playback information is shown.
iPod
Out * Displays the menu and playback
screen output from iPod/iPhone.
(☞ page 30)
• You can control playback from
this unit in the same way as on
the iPod/iPhone.
• When using iPod with video with [iPod] selected
for <iPod Control>, select [iPod] for <AV
Input> and connect iPod using KS-U30 (separately
purchased). (☞ page 27)
* <iPod Out> is available when <AV Input> is set to
[iPod] (☞ page 27) only for the following iPod/iPhone
models:
– iPod nano (6th Generation)
– iPod touch (4th Generation)
– iPod touch (3rd Generation)
– iPod touch (2nd Generation)
– iPhone 4S
– iPhone 4
– iPhone 3GS
– iPhone 3G
Selecting preference settings
for iPod/iPhone playback
When the source is “iPod”...
1
2
Audiobooks Select the speed of audio books.
Artwork Shows/hides the iPod artwork.
• You can change the settings when <iPod
Control> is set to [Head].
Notice:
When operating an iPod/iPhone, some operations
may not be performed correctly or as intended. In
this case, visit the following JVC web site: <http://
www3.jvckenwood.com/english/car/> (English
website only)
For some iPod/iPhone models, the performance
may be abnormal or unstable during operation. In
this case, disconnect the iPod/iPhone device, then
check its condition.
If the performance is not improved or slow, reset
your iPod/iPhone.
EN_KW-AV61E.indb 28 EN_KW-AV61E.indb 28 12/11/09 11:27 12/11/09 11:27